Thursday, October 3, 2019

October 03, 2019 | Posted in by Daiki | No comments

Rockville Marine/Boat 2600 Watt 6 Channel Amplifier + PA Microphone (RXM-S6)

Rockville Marine/Boat 2600 Watt 6 Channel Amplifier + PA Microphone (RXM-S6)

 Bought this for my Sea Ray Sundeck 210. Ran all new speaker wire also added a punch 10" Sub and new kenwood 6.5" x4 speakers. This and rocks these speaker. With Bluetooth also included in this amp I can easily hook my phone and use it as a music source. Pandora, Amazon Music. Nice Amp!!

This little white box is incredible!! I finally got on the water with my wife and her family today in the pon-tune. The amps and speakers were trashed so I replaced the speakers last night. There is now 4 Kenwood 8" 2 ways and 2 Planet Audio 10" subs in sealed boxes. I pulled 2 Kicker amps and replaced them with your 8 channel 1500 watt amp. WHAT A DIFFERENCE!! That little box made the Pon-tune into a powerhouse of sound!! Thanks for a killer amp, good thing I bought some more of them because my go fast boat and truck are due for upgrades!!

I looked at many amps, read reviews and researched this when I came across this one. I found a video from the company and decided to purchase it. I was impressed and this amp kicks butt! I am glad I got it. Good instructions and worked great.

I was going to post pictures but oh well. Bought this for my boat after going thru 3 car amps. Even though we are in a freshwater lake the elements in the air just ruin regular car amps. If you have a boat, get a Marin amp! This amp is pushing a 10" JL sub bridged on 2 channels and then my tower speakers. Its loud and sounds great!

Great amp, powered all 8 of my 6 1/2 kickers with no issues


Get it Now

Feature Product

  • Rockville RXM-S6 Marine/Boat 6 Channel Amplifier 2600 Watt Peak / 1300w RMS.
  • CEA Compliant Power Ratings: 420 Watts (6 x 70 Watts) at 4 ohms and 1% THD+N. 660 Watts (6 x 110 Watts) at 2 ohms < 1% THD. 660 Watts (3 x 220 Watts) bridged @ 4 Ohms < 1% THD.
  • RMS Power Ratings: 1300 Watts (6 x 220 Watts RMS) @ 2 ohms. 1300 Watts (3 x 440 Watts RMS) @ 4 ohm Bridged. 780 Watts (2 x 130 Watts RMS) @ 4 ohms.
  • Peak Power: 2600 Watts (6 x 440 @ 2 ohms or 3 x 880 @ 4 Ohms). High-Speed MOSFET Power Supply. Studio-Grade Bipolar Output Stage Transistors.
  • Fully Adjustable 12dB / Octave Crossover with Differential Circuitry. CH 1 - 6. Low Pass 50Hz - 250Hz. High Pass 50Hz - 250Hz.
  • Full IC-Controlled Protection Circuitry. Fully Adjustable Bass Equalization Control. 2 Ohm Stable Stereo. 4 Ohm Mono Bridgeable.
  • 3 Channel Mixed-Mono Capable@ 4 Ohm. 2 CH / 4 CH/ 6 CH Input Mode Selector. Mute and Delay Soft Start System.
  • Remote Dashboard Subwoofer Control. 8 Volt Preamp Circuitry. ELNA Brand Audiophile Quality Capacitors.
  • Status Mode LED Indicator. Frequency Response: 10Hz - 40KHz. Minimum THD at Rated Power: 100dB.
  • Damping Factor: > 200 @ 100Hz. Dual 60 Amp Maxi Fuses. Dimensions: (W x H x L) 8.5" x 1.8" x 16.1".

Description

The RXM-S6 is a 6 channel high power amplifier with 2,600 Watts peak output,
1320 Watts RMS output (6 x 220 RMS @ 2 Ohms) and 780 Watts RMS (6 x 130 @ 4
Ohms). You can also bridge the amplifier and get 3 x 440 Watts RMS @ 4 Ohms. The
CEA-2006 compliant rating is 70 Watts x 6 @ 4 Ohms and 110 x 6 @ 2 ohms

This 6 Channel marine amplifier is amazing. It gives you amazing options for
your marine speakers and/or subwoofers. Here are some wiring configurations. You
can run 4 channels to (4) full range speakers, and then 2 of the channels to (2)
subwoofers. You can also run those last 2 channels to wakeboard speakers if you
wanted.

You can also run 2 speakers to each channel and connect for a total of 8
speakers to the 4 channels, and then you still have 2 channels left for your
subwoofer(s). Another option would be to connect 12 full range speakers.

You can bridge any of the 2 channels together which means you can run this is a
6 channel, 3 channel, or 4 channel amplifier. So if you need 1 channel to have
double the power, you can just bridge 2 channels into 1 and double the power.



I didnt really know what to expect buying a low priced 1200w amp. I was pleasantly surprised. I am running a Fusion RA-70 head unit and driving 4 Wet Sounds 808 speakers. My old amp was pushing 35w RMS per channel. I figure I am getting a clean 100w RMS per channel of clean power out of this amp. I am not a thumper. Classic rock mostly. I have not yet run this amp for prolonged periods at high volume. I have rune the amp for 12 hrs at medium volume with no problems.

I think this amp works great for the money. I paired it with a 10" alpine marine sub. Extremely happy with how it sounds. Just mounted sub under a seat on the boat and sounds great now. Now I've heard better. It doesn't have that really tight bass but works for my application.

GREAT AMP. IM RUNNNG 4 COMPONENTS ..THE RE AUDIO XXX IN MY GIRLS 2010 HIGHLANDER... AMAZING. CAN POWER THEM PERFECTLY

Over all very happy. Used in a side by side, so not looking for real high fidelity. Shipping was quick, install was easy.
Only negative is the mic/ loud speaker didn't work. No, biggie, probably wouldn't use it anyway.

These are not cheap junk amps. Replaced my rxm4 with this in order to add a sub to my existing 4 speaker system. Now it runs 4 fusion 7.7" signature series and 1 fusion 10" signature sub. Sounds awesome. Well worth it.

Get it Now

0 comments:

Post a Comment

Search Our Site