Friday, November 1, 2019

November 01, 2019 | Posted in by Daiki | No comments

SoundBox Connected 4 Gauge Amp Kit Amplifier Install Wiring Complete 4 Ga Installation Cables 2200W

SoundBox Connected 4 Gauge Amp Kit Amplifier Install Wiring Complete 4 Ga Installation Cables 2200W

Very thick, high quality wire. Much thicker than what I needed for my application, but the other 8 awg kit was sold out, so I bought this and I don't regret it! Just make sure you find a good ground! The fuse was easy to wire up, and had multiple seals on it when you tighten everything down, so I'm not worried about water leaking in. The only complaint I have is that the terminal connectors were too small, but all it took was a drill and a file to make it fit. Good kit!

For the price it's a great kit. It includes everything needed to do a good clean install. My only flaw I don't care much for is the inline fuse holder. Feels like it could break if tightened too tight. I wish they would have included a smaller fuse than an 80 amp but not a big deal I can pick one up locally as well as a compacitor. I have a single 10 installed running an old school ppi amp bridged pushing 330 watts end and it draws so much juice my headlights will dim and on certain songs the car will die. Next upgrade will be an alternator and compacitor to help cure that problem. Over all good kit for the price just be careful with the inline fuse holder and not over tighten it to where it will break I recommend.

I've bought 2, one set to sub amp (running 2 ohm at 600w RMS) and the other to a 4 channel amp (100w per ch RMS). Coming off an Alpine at 18w RMS per ch to 6" Focals in front, 4 stockers in back, and a 12" sub in good size ported box. All in a Safari van. Not a huge system but sounds great to me! Just installed so no longevity report.
Pure copper instead of this 4gauge CCA will really cost. Home depot has wire for homes but by the book, autos should have thicker insulation. Many useless connectors and the others are cheap and usually need to be drilled out larger for batt and ground. Auto parts stores sell better but soon you're building your own kit. Speaker wires to the stock installed wires, like to a harness, don't need to be any thicker, or longer if the amp isn't miles away.
Do note only 1 pair (+ and -) RCAs. Fine for a single sub but will need another for stereo (2 channel). Walmart has em for $8-10.

I gave it five starts because it literally came with everything needed for an installation. The kit is cheap and it comes with cheap materials which isn’t always a bad thing. The red power wire was long enough to run from the battery down to the trunk area of my 2014 Mustang. The ground is very short so I had to improvise, but all worked at the end of the day.

Very cost effective wiring kit. Its not the highest quality wiring but works great for 800watts RMS.
The ring terminals feel cheap and thin, but they make a proper connection. Id suggest getting better ring terminals for the 4 gauge wire. The fuse holder works but its not my preference for fuse holders.
Plenty of length for my 2015 Hyundai Veloster


Get it Now

Feature Product

  • 4 Gauge Red CCA (Copper Clad Aluminum) Power Wire: 17 Feet / 4 Gauge Black CCA (Copper Clad Aluminum) Ground Wire: 3 Feet
  • Black/White Triple Shielded Twisted Pair RCA Interconnect: 17 Feet
  • 16 Gauge Brown/Silver Speaker Wire: 17 Feet / 18 Gauge Blue Remote Wire: 18 Feet
  • Inline AGU Fuse Holder w/ 80 Amp AGU Fuse / Protective Black Wire Loom
  • Installation Accessories/ Connectors / Terminals, Wire Ties and Wire Loom Included

Description

General Features:  2300 Watts Peak Power Rating Complete 4 Gauge Amp Install Kit Heat Resistant Wire Jacket Premium Heat Durability In-Line AGU Fuse Holder Triple Shielded RCA Interconnect Cable Premium Grade Cables   What's Included:  4 Gauge Red CCA (Copper Clad Aluminum) Power Wire: 17 Feet 4 Gauge Black CCA (Copper Clad Aluminum) Ground Wire: 3 Feet Black/White RCA Interconnect: 17 Feet 16 Gauge Brown/Silver Speaker Wire: 17 Feet 18 Gauge Blue Remote Wire: 18 Feet Protective Black Wire Loom Inline AGU Fuse Holder 80 Amp AGU Fuse Installation Accessories/ Connectors Terminals, Wire Ties and Wire Loom Included Authorized Internet Retailer  1 Year Manufacture's Warranty Please Note:  Bulk Packaged. Not For Resale. WIRE IS NOT AWG (AMERICAN WIRE GAUGE). SET TO INTERNATIONAL STANDARDS. 



This kit was perfect for a large sedan made by GM. Every wire length was able to be used without any extra bundles.
The fuse that comes with this set is rated at 80amps so make sure if it is not the right one get the correct one as those are cheap by themselves.

I was pleasantly surprised when this arrived to find a very generous amount of 4 gauge wire and other quality wire. All the lugs/terminals you need are there, it's literally a turn key package. Only thing you'll need is a small Allen wrench for the inline fuse holder. Easy 5 stars, super fast shipping.

Looks like 4 gauge. Everything feels high quality can’t wait to test it.

Great price ,,,,,,,but double check that more installation parts are not needed before going to a shop cause they charge a lot more and once your in the door its hard to turn around and tell them you have to come back later after ordering more parts to let them hook it up ..........they probably would just raise there quoted install price anyway like they did me .

great quality wire and came with everything i needed to wire my subs. reason for the 4 star is because the quality of the fuse was lacking, seemed to not pinch or hold the wire tight enough and felt a little cheaper than what i expected. but that can be solved with some simple electrical tape. well worth the money.

Get it Now

0 comments:

Post a Comment

Search Our Site