UPDATE: I've added 2 stars to my original review. A few days after I posted a 3-star review complaining about an apparent quality control issue (particulate matter stuck to underside of the protector *inside* the protective sheet), I received a direct email from a company representative apologizing for the problem and offering a free replacement. I was very busy & didn't respond to the email at first, so I received a 2nd email with the same offer a couple of days later. I emailed back, verified my shipping address, and a few days later a new package was on my front porch. I waited overnight for it to warm up to room temperature, removed the defective protector from the iPad, and installed the new protector after very, VERY carefully inspecting it and using the installation kit to clean the iPad's screen. There were no adhesion problems, very few bubbles (all of which were easily cleared in a matter of moments), and only one tiny imperfection that is literally invisible without a magnifying glass and a careful search. I am very pleased with the replacement product and happily shocked at the exemplary customer service. (To repeat, the company contacted me with an apology & no-strings-attached replacement before I had the chance to contact them.) As of now, I'll definitely buy from them again as needed in the future.
One quick note: As mentioned in my original review, there are stick-on tabs to create a "hinge" to help position the screen protector prior to installation. This time around I did not use them and found it easier to carefully position the screen protector the old-fashioned way. If you buy this product I recommend practice fitting the protector (BEFORE removing the film covering the adhesive!) with the hinges so you can tell if it would be easier for you to place it correctly with or without them -- I'm sure the choice will vary among buyers.
ORIGINAL REVIEW: I've used tempered glass screen protectors on a variety of devices, and the reviews of this one led to high expectations. I was amazed at how well-packaged it is: a semi-rigid heavy cardboard "book" style folder, with a separate "installation kit" inside along with the screen protector itself in a protective sleeve and an internal frame keeping everything in place & protected.
Unlike my experience with several other similar (smaller) protectors of other brands, the installation kit was complete and -- hooray! -- the "wet" wipe was actually wet. (Be careful opening the installation kit; I accidentally tore off a small part of the instruction booklet.) The first thing I noticed was more complete/complex instructions than I'd expected, along with a note saying I should view an instructional video on YouTube. The video came up right where it was supposed to be, but I immediately noticed that it skipped over 1 step in the printed directions (use the dry wipe after the wet wipe but before the microfiber cloth), and did not show or mention the stiff card (size of a credit card) intended to help move bubbles out from under the screen protector as the final installation step.
One very helpful feature of the installation kit was "hinge" stickers that let you pre-position the protector and then swing it out of the way to thoroughly clean the iPad screen, then just swing it back into place for installation already in the correct position... at least in theory. I still had to be very careful positioning the protector because the stickers still allow a bit more side-to-side wiggle than is perhaps absolutely necessary. It was when the protector was in place and beginning to adhere to the iPad screen when things went a bit sour.
Before using the installation kit, I had buffed the iPad with a clean microfiber cloth until it shined. I then used the installation kit's wet wipe, making sure to cover every tiny bit of the surface, followed by careful wiping with the kit's dry wipe. I then buffed the iPad with the microfiber cloth from the installation kit, followed by the included "dust absorber" (a big sticker you lightly tap all over the screen to pull off any dust particles that somehow were missed in all the preceding steps). At every step, I carefully inspected the iPad for dust, fingerprints, and any other kind of marking, checking it at multiple angles in direct & indirect lighting. (I can be a little obsessive when it comes to screen protectors.) I checked the screen protector one more time at different angles, and saw a few little spots I decided were probably dirt on the protective film. I then peeled the protective film off the back of the screen protector, swung it down onto the iPad, and began pressing out a few bubbles...
...only to find 7-8 bits of kind of particulate matter causing permanent bubbles scattered across the screen (not to mention the entire upper left 1/8 of the screen protector not sticking nearly as well as the rest of it). I peeled the protector back, did some more cleaning, reapplied the protector, and had the same particles in the same spots. I then very gently used the "dust absorber" directly on the sticky side of the screen protector and reapplied it for a second time, and was rewarded with just a few small bubbles I was able to manipulate out.
As of now, the upper left 1/8 of the screen protector seems to be sitting on the iPad screen and not actually adhering to it (that's 1 star off), and I'm a bit annoyed at how I had to clean particulate matter off the supposedly clean & protected *sticky* side of the screen protector (that's the 2nd star off). For the moment it seems to be staying in place & remaining clean, but I'll have to think twice about another of the same brand in the future.
There were a lot of extra items in this kit to make sure it goes on correctly. I had no trouble actually putting it on and I didn’t need all of the extras for help. My issue is that I have lots of pets so flying pet hair IS a huge problem for me. So I had to do some prep work before attempting this. I cleaned my smallest bathroom and turned it into an actual “clean room”. I turned the exhaust fan off and central heat off so NOTHING would be flying around. I put on a full clean room suit, covered my hair and shoes. JUST KIDDING😹, but I did change my clothes so they were fur-free! Then I started the procedure: I cleaned the screen with their clean and dry wipes, then applied the protector as instructed. MOST IMPORTANT PART IS LINING IT UP! You really only get one shot because it will crack if you try to move it so make sure you are on target. Luckily I nailed it the first time and it went right on perfect! There was not a bubble, speck of dirt, or cat/dog fur to be found under the screen! I used the squeegee card to make sure it was completely affixed and VOILA! It is perfect. So most of you will not go to my silly extreme measures, but I have gone thru these things like qtips because of just haphazardly throwing them on. So it was worth the prep time to ensure this one did not end up in the trash. It is shiny and sooo strong and yet all of my touches and stylus work great with no issues. Hope it lasts and I don’t have to go thru this for a long time! Good luck. Let me know if this helpful to anyone.
I received my screen protector today and tried to put it on. Everything was going great- my iPad was nice and clean and everything was ready to go. I peeled the adhesive sticker off the protector and put it on the screen. Everything looked decent except there was a bit of dirt underneath the screen protector. I took it off in an attempt to clean the protector. That's a no go on this one. As soon as I tried to clean it it made the proctector really smudgy and look terrible. This seems like it will be a good screen protector but I would highly recommend making sure you don't have a fan on during installation. I'll be purchasing another to try again. Hopefully I can give his more stars after that.
**Update- Since my last review this company's customer service team reached out to me. They replaced the previous screen protector and gave detailed instructions on how to install. I took my time this time to make sure there was absolutely no dust under the screen protector. This time things went great. The screen protector went on with no problems and does a great job. I would recommend this screen protector- just make sure to take your time to install and be detail oriented. Also, don't have a fan on during installation. Their customer service was great!
This one seemed one of the best among the dozens I researched. Cleaned everything meticulously exactly as instructed, applied with great care, but still ended up with bubbles, it looks like there’s a piece of Swiss cheese on the screen now.
Update: these folks are big on customer service! Very soon after I posted my above annoyance, I was contacted by customer service who made sure I promptly got another screen protector at no cost. I haven't put in on yet, will save it for when I absolutely need it. For now, the holey bubbly screen protector is keeping my iPad well protected from scratches and free of fingerprints and other smudges, which was the main goal. Having an extra screen to take overseas is a huge bonus. This has been a great Amazon experience, will purchase future screen protectors from SPARIN. Thanks!
I've used screen protectors before, including the tempered glass kind. Never had one of this quality before. It was super simple to apply although I admit I did not have the patience to use the included wet/dry wipes or the marker stickers. I simply cleaned my screen with a microfiber cloth, removed the plastic to reveal the adhesive, then lined up the home button and the sides of the iPad before slowly lowering the protector onto it. That's it. Literally had zero bubbles or dust underneath. The thing that truly blew my mind though was the coating. I don't know what kind of oleophobic nanotechnology this company is using but it does NOT pick up fingerprints. At ALL. I tried smudging and smearing and dragging my fingers all over it. Not a single mark. I'm seriously impressed.
Feature Product
- 1. PERFECT MATCH: For the New iPad 9.7" (2018 & 2017 Release) / iPad Pro 9.7-inch, 9H hardness new iPad screen protector can protect your device against dirt, dust and scratches by keys or other hard items
- 2. VERY IMPORTANT: NOT FIT for New iPad Air 10.5 inch / iPad Pro 10.5 inch / iPad Pro 12.9 inch / iPad 2 / iPad 3 / iPad 4 and any other model
- 3. SUPPORT APPLE PENCIL: Only 0.3mm-thickness iPad screen protector keeps the the sensitivity of Apple Pencil and Multi-Touch subsystem. Follow your speed with precision and responsiveness
- 4. EASY INSTALLATION: The air-exhausting adhesive makes the tempered glass automatically attach to your iPad screen smoothly, hassle-free and bubble-free, no residue when removing the screen protector
- 5. HIGH DEFINITION: Features high-resolution retina display as the original screen of 9.7-inch iPad, bringing immersive experience. Note: If you have a cracked or shattered screen protector it should be slowly lifted from the sides and removed. Please put on the gloves before lifting or removing the screen protector to avoid cutting your fingers
Description
New iPad 9.7" (2017) / iPad Pro 9.7 Tempered Glass Screen Protector
[Ultra Clear] [Bubble Free] [Anti-Scratch] [Apple Pencil Compatible]
Perfect Match:
Perfectly fit for New iPad 9.7" (2017) / iPad Pro 9.7
Very Important:
NOT FIT for iPad Pro 10.5 / iPad Pro 12.9 / iPad 2 / iPad 3 / iPad 4
Multi-Touch Compatible:
No interference to the Apple Pencil sensitivity and Multi-Touch subsystem.
9H Hardness:
9H harness tempered glass, much stronger than normal PET plastic screen protector, can effectively protect your device from crash.
High Definition:
Precise cut and design, smooth Surface, giving you an unprecedented experiences than ever before.
2.5D Round Edge:
The 2.5D round edge provides more comfortable handle feeling than the right angle edge, and will never hurt your fingers.
Easy Installation:
Hassle-free and bubble-free installation, automatically attach to your device's screen smoothly.
Package Included:
1 x Screen Protector for New iPad 9.7" (2017) / iPad Pro 9.7
1 x Accessories Kit
SPARIN never authorize any third party to sell our products, only purchase from SPARIN with superb customer service.
In a word, Super!
This sparin product not as happy with, as the key board. Followed the instructions for installation, but after installed, I’ve noticed some fairly big bubbles, between the glass and screen, and wasn’t been able to remove them. E-mailed sparin, and in about 24 hours, a rep named Lily was very helpful in directly me to a website, that give specific instructions on how to remove the bubbles. The info did work, and it removed around 75% of the bubbles on the screen. But I cracked the glass removing the bubbles on my second attempt at fixing it. I informed Lily of this, and she sent me a replacement screen free of charge and delivery. Overall, even though the installation of the product, can be a little tricky, based on the original directions. The customer service and follow up from Sparin was excellent, and I wouldn’t hesitate to purchase products, from a company showing this much integrity with their customers complaints. I’m really quite pleased with the way the situation was resolved to my satisfaction!
UPDATE: I’ve upped my review to the full 5 stars after receiving a response from customer service—unsolicited—apologizing for the bubbling issue despite adhering like a sensei’s acolyte to the installation process. A replacement product was mailed—also unsolicited—and Alisa, the customer service rep, could not have been more helpful and apologetic. I appreciate that the retailer wasn’t full of mere words but actions backing its product, and to substantiate its confidence, the second screen protector was installed without incident. I admit it seemed like there again might persist some pockets of air but within a couple of minutes they had all adhered. I’ll attach an updated pic soon of the glossy screen.
In all, I’m pleased with it. Yeah, it took some hassle I didn’t seek, but the customer service made up for it. The product works well. I’d purchase again, and I’d completely recommend the product and retailer to others.
ORIGINAL REVIEW: Bubbled in the middle of the screen. See pic. And I had prepped w/ the focus of a neurosurgeon scrubbing in for a craniotomy. I watched the YouTube instructional video thrice (thrice!), reviewed the instructional booklet, prepped my area and iPad, and dug into application. Followed everything precisely as guided. Went well, until it the cruel final.
And the guidance is good, if sometimes lengthy. There are many steps: dry fit the protector w/ the guidance sticker [advice:
APPLY STICKERS FIRMLY b/c they will def slip destroying your handiwork at the final], wet cleaning, dry cleaning, dusting up w/ sticker (a nice feature), and application. The application is nice w/ a quick suction followed by a little bit (theoretically) of ironing out of bubbles.
But my bubble—obtrusive, frustrating, distracting—betrays the point of the product.
Product may otherwise be nice. I can only stare at this diabolical bubble whenever my eye spies the screen and hope it’s sweetly, surely asphyxiated.
Sparin tempered glass screen protector comes with all the material tools to install the iPad screen protector perfectly. The screen cleanser takes away all the oils and dirt from the iPad screen. The lint-free dry wipe cloth wipes off the iPad screen sparkling clean without leaving dust. When applying the glass screen protector, the installation package comes with a "dust collector" (a light adhesive) that you can use to take off unexpected dust and lint in the air that attaches to the application face of the glass screen protector and iPad screen. This will prevent the irritating and frustrating "bubbles" that these particles can cause. The outcome results appears as if no screen protector is on... shear clarity if directions are followed and you remove any particles on the iPad screen and screen protector application face. I highly recommend this screen protector to protect your iPad screen.
Screen protectors have always been a headache to apply for me, even the ones that come with the little microfiber cloth to wipe your screen. You either get unsightly bubbles from dust specks (no matter how much you wipe), or the positioning is off (no matter how much you line it up) - and while you are adjusting it, the underside is attracting dust like there is no tomorrow!
Which is why THIS screen protector is head and shoulders above the rest. It came in the pictured light yellow cardstock folio (kind of like an iPad case)- not necessary but A+ for presentation. It also had a ton of accessories including positioning stickers (no more readjusting!), 3 different kinds of wipes (wet, dry, and microfiber), and a dust removing sticker. The tempered glass itself looks and feels exactly like your shiny new iPad screen so you're not sacrificing visual or tactile sophistication for the sake of protection. And the best part is it's self-adhering - just lightly touch it to your (perfectly clean) screen and watch it work! Barely any extra squeezing or pressing is needed. I followed the instructions exactly and ended up with only one tiny bubble which I pressed out easily, which NEVER happens. I can't recommend this product enough!
I was so bummed when our 1 year old dropped the ipad and left a crack in the screen- and we only owned it for a month! I jumped on Apple support and added the Apple Care for 2 years; paid the $49 in addition to the Apple Care and had a box shipped to me to repair the iPad screen. But as I was taking the outer protective shell and this tempered glass off, I was shocked to see that the iPad was NOT cracked- the tempered glass was! This screen protector completely saved the iPad's screen! It absorbed all of the blow. THANK YOU for such an amazing product. Ordering two more to keep handy- these kids around here are dangerous to iPads!
0 comments:
Post a Comment