
Worked great to connect my Lowrance Elite-5 to my Terrova with ipilot. Could have been a couple inches longer. Was hesitant to buy based on the photo. My units cable had a locking collar on it. This does not but it just plugs in and stays put.
I purchased this cable based upon the Minn Kota web site "Universal Sonar Compatibility Chart". I am connecting from a Minn Kota Terrova 80 / i - Pilot 24V Trolling Motor with US2 and Foot Pedal to a Lowrance ELITE-4X HDI Fishfinder without Transducer. Although the Minn Kota web site lists this (MKR-US2-9) as the required cable, in fact the correct cable is MinnKota MKR-US2-10 US2 Lowrance Adapter Cable.
I have contacted Minn Kota customer service and told them of the error. They indicate that they will correct their information. I gave the item 5-stars since the error seems to be with Minn Kota documentation and not the actual quality of the cable. It had a 5-star rating from others and I chose not to lower the average on a product that I could not use.
I have added a picture of the back of the Elite-4X for reference.
Works properly for connecting built-in US2 transducer to HB Helix 5.
this adaptor is necessary to connect a Lowrance sonar to the Minn-Kota motor which has built in transducers.Minn-Kota should make it clear that you need an adaptor cable when you purchase the electric motor from them so you could order the correct adaptor at the same time.there are 3 or 4 different adaptors depending on which brand sonar you have.
I used this adaptor as a replacement plug for my lowrance transducer, as the old plug rusted out. I cut and spliced the old cable to the adaptor with less effort than I had anticipated. What's more, is it worked flawlessly. I used heat shrink tubing to seal the spliced connections and it has worked ever since

- Connect your motor to your favorite sonar or fishfinder with waterproof connectors
- Shielded for added peace of mind
- Streamlined, interference-free sonar performance
Minn Kota MKR-US2-12 Garmin Echo Adapter Cable 1852072. Choose the Universal Sonar 2 adapter plug that matches your fishfinder. It allows you to quickly and conveniently connect and disconnect your motor from your fishfinder. Shielded cable connections virtually eliminate the possibility of sonar interference and are waterproof for extra dependability. Universal Sonar 2's state-of-the-art, integrated and protected transducer is built into the lower unit of the motor and all wiring runs inside the indestructible composite shaft - out of sight and out of harm's way. No clamps. No ties. No exposed wires or connections. You get optimal sonar performance to help you find fish. The integrated transducer, concealed wiring and plug-in compatibility with a variety of fishfinders made the original Universal Sonar a "home run" of an idea. So naturally, we've made it even better. Universal Sonar 2 features temperature sensing - compatible with all major fishfinder brands - and the performance of dual beam technology (available with all Humminbird Dual Beam PLUS models and select Lowrance and Garmin models). An expanded view and greater bottom detail gives you a totally new perspective of the water below.
product works as intended and does the job.
Easy to connect US2 from trolling motor to depthfinder cable connection with several different lengths
Perfect fit. Works great.
Hooked up to new trolling motor with no problems.
Yes it did work out
