By far the easiest screen protector to apply!! It's so simple a 2yr old could do it no joke also it's as great as they say it is!!! Also people who r upset with the way their same product is working the way they want it it's because you don't have a clue whenever air hits the screen protector you will get bubbles no matter what or how good however there is very few and not noticeable thanks again for this amazing product!!!
I absolutely LOVE LOVE LOVE these tempered glass screen protectors. I cannot recommend them enough to everyone that asks me about mine. I have one on my iPhone and now on my iPad mini. They are very protective, nothing is going to get through to your screen to scratch it! My favorite part is how easily they go on!! Regular screen protectors are flexible and require smoothing out and getting the air bubbles out and are just so frustrating!! But that's not the case with tempered glass protectors, they go on all at once and are not flexible at all so there's no smoothing out or air bubbles! Just line it up, lay it flat and push down across the screen the seal and that's it! I've seen other reviews complain that it doesn't go all the way to the edge - well no screen protector does because the edge is round and that would cause a crease and prevent it from dealing to the phone. But it does go very close and I doubt anything is going to scratch the small space that isn't covered - and besides that, most cases cover the area that isn't covered by the screen protector. I'm seriously never going to buy any other type of screen protector again!
Perfect screen protector. I have been using tempered glass protectors for quite some time now and I put them on every screen I have cell phone or tablet or camera. This is another top quality brand. Really scratch resistant, improved contrast on the screen, colors pop more. Smooth rounded edges, it's perfect and myself and my iPad Mini 3 are happy. Easy to install, just line up the camera and touch ID button and slowly lower. I found it was easier to have the touch ID lined up first, then pin pointing and centering the camera is the second step. Once you feel like you've got it lined up, check the edges too, but pay most attention to the touch ID and camera. Then just let go of the touch ID side and watch it stick itself to the screen. If you make a mistake, gently peel one corner and slowly lift, once you re-apply, don't worry, it will go back down and the air will disappear. It looks like it might not but it always does over the course of a half hour or so.
Having only previously used plastic-film screen protectors, I was surprised to open the (very sturdy) packaging of this product to find a hard, relatively thick sheet of glass. The instructions frankly left something to be desired, but it's not rocket science: you clean the device screen with the included microfiber cloth and dust-removal sticker, apply the small handling/positioning tab stickers--a great idea I hadn't seen before--to the protector, peel the backing sheet from the glass, carefully position the protector and press it down. I struggled briefly with a few air bubbles, which seemed a bit more difficult to deal with given the thickness and hardness of the sheet, until I figured out the trick. Use your fingers to move the bubbles towards the edges, and press them together to combine into one large bubble, then use a fingernail to gently lift up the edge of the sheet at that point so the air can escape. After doing that a few times, I ended up with a beautiful, bubble-free installation. The cover is glass, so it's smooth and hard and perfectly clear--aside from the extra thickness around the Home button, it really seems like the device's original screen surface. No issues with touch sensitivity or performance. Overall, a fantastic product at a reasonable price. This is the one to get!
I bought this to further protect my *already cracked* iPad mini screen. My mini has been to toddler war and has taken some permanent damage. So I bought this and I bought an impact-barrier case to keep it on. It was really easy to install and came with stuff to ensure the glass is as clean as possible including a little cloth and a dust catching "cling" (similar to a tiny window decal). It also comes with easily removable stickers that you can stick to it and hold on to to guide the tempered glass into place without getting your fingerprints or debri between the protector and your mini. When I say easily removable, I mean really easily removable. As in, I couldn't get them to stay affixed to the glass long enough to stick it onto my mini. So when the tempered glass began adhering to the device, there were air pockets. The instructions advise to gently press the screen to remove air pockets. When they say gently, be gentle folks. I started gentle and the air wasn't coming out, so I pressed a little firmer - still air pockets. Long story short, the tempered glass cracked before I got the last air pocket out of there. I'm only docking it one star because I can't tell you if it's the stickers' fault (the ones to help you guide the screen protector into place) for not holding onto the glass for me or if it's because my iPad is already messed up that I got the air pockets. I'm leaning toward it being the mini's fault. The crack is small so I left it on and put my mini in the case I got. It's been a few days, don't forget my mini is well-loved, and the tiny crack in the protector hasn't grown so I'm not dissatisfied. I recommend this product to help protect your mini screen.
Feature Product
- Fit for iPad models: A1432/A1454/A1455/A1489/A1490/A1491/A1599/A1600. Made with high quality 0.33mm thick premium tempered glass with rounded edges exclusively for Apple iPad mini 1/2/3, NOT Compatible with iPad Mini 4
- Extremely high hardness: resists scratches up to 9H (harder than a knife)
- High-response and high-transparency
- Dust-free, fingerprint-free, one-push super easy installation, bubble free
- Retail package includes: 1-Pack tempered glass screen protector, cleaning cloth, dust removal stick, guide stick, instructions, life-time warranty card
Description
Made with high quality 0.33mm thick premium tempered glass with rounded edges exclusively for Apple iPad mini 1/2/3, NOT Compatible with iPad Mini 4
(4th time I've purchased a JETech product, still the best product and value out there for a screen protector).
Best screen saver made. I'm really at a loss to think why someone would buy a different product once they know this kind exists. Hard tempered, thin, and perfectly clear glass. I got one for my iPhone when I got tired of the craptacular plastic film one and saw these online. Took the risk and bought one (two in the package). Cleaning kit was perfect also. Dropped my phone the next week on a concrete curb and saw the crack (crap!). Miracle of miracles, it was only the JETech screen protector. Removed it, checked the screen (undamaged), put the second one on. I then bought one for my iPad mini. Went on just as easy, beautifully clear, and it was only $7.99!!! A seriously great deal. It's like having a car's windshield for your iPad.
I've bought and applied two of these screen protectors (after the first, it was a no-brainer to be a repeat customer when changing out another iPad mini case and screen protector). I'm very happy with this product. It comes well packaged; clear instructions and the proper materials are included; and it adhered both readily and well. Even when I goofed and had to pick up a corner and have a redo, the screen protector adhered well and I could get eye bubbles out (it helps to hold one corner up gently as you slower press down and adhere the protector from outer edges to the center and to that last corner).
iPads look great with the protector; you can't tell you are looking at or touching something other than the actual device screen. They clean up easily and thoroughly when messy kids get their fingerprints (or food . . . sigh) on the glass. And I rest easy knowing the device is protected. Fantastic product for only $9.99 (price when I purchased)!
Maybe it was my fault.... so hard to get set on the iPad & the 2nd attempt picked up a small pice of dust-- ruined it!!
Update: 2/14/17. Perhaps I got a defective first one-- only posted the above review and the company contacted me and sent me a new one -- and it is perfect. I can't even tell it's on the screen, it is that clear. So, my rating goes to five stars and I thank the company for reading the first review and following up on it.
Great product. The installation instructions seem like they are for a previous version, but I didn't have any problems. I was able to install without any dust getting between the protector and the screen. It was also perfectly aligned. TIP: create a hinge with packing tape before removing the protector's film. When you can "flip" the protector over, like closing a book, and it's perfectly aligned on the iPad carefully lift protector by edge and peel away the film. Then let it drop back down. Once the protector is pressed in place remove the packing tape.
I have aeveranof these on different devices and have always been satisfied with the fit, easy installation and durability. I actively look for this brand now.
This particular one was for my son's iPad mini 2. Just a word of warning, it fits edge to edge so if you have a case or sleeve that fits over the edge it's going to be a problem (I do; the case pops up one corner pretty regularly). Not their fault but just advice. Great product and five stars.
0 comments:
Post a Comment