This little white box is incredible!! I finally got on the water with my wife and her family today in the pon-tune. The amps and speakers were trashed so I replaced the speakers last night. There is now 4 Kenwood 8" 2 ways and 2 Planet Audio 10" subs in sealed boxes. I pulled 2 Kicker amps and replaced them with your 8 channel 1500 watt amp. WHAT A DIFFERENCE!! That little box made the Pon-tune into a powerhouse of sound!! Thanks for a killer amp, good thing I bought some more of them because my go fast boat and truck are due for upgrades!!
I looked at many amps, read reviews and researched this when I came across this one. I found a video from the company and decided to purchase it. I was impressed and this amp kicks butt! I am glad I got it. Good instructions and worked great.
I was going to post pictures but oh well. Bought this for my boat after going thru 3 car amps. Even though we are in a freshwater lake the elements in the air just ruin regular car amps. If you have a boat, get a Marin amp! This amp is pushing a 10" JL sub bridged on 2 channels and then my tower speakers. Its loud and sounds great!
Great amp, powered all 8 of my 6 1/2 kickers with no issues
Feature Product
- Rockville Rxm-f3 1600 Watt peak/800W RMS Marine class D mono block amplifier.
- Ceja Compliant Power Ratings: 65 watts RMS x 4 channel @4 ohms and 1% THD+N. 85 watts x 4 @ 2 ohms < 1% THD. 2 x 200 watts Bridged @ 4 ohms < 1% THD.
- Rams power Ratings: 800 watts (4 x 200 watts RMS) @ 2 ohms. 800 watts (2 x 400 watts RMS) @ 4 ohm bridged. 500 watts (4 x 125 watts RMS) @ 4 ohms.
- Peak power: 1600 watts (2 x 800 @ 2 ohms or 1 x 1600 @ 4 ohms). high-speed MOSFET power supply. Studio-grade bipolar output stage transistors.
- Fully adjustable 12Db/ octave Crossover with differential circuitry. Ch3 & Ch4 low Pass 50Hz - 3Khz. Ch3 & Ch4 high Pass 15Hz - 1Khz. Ch1 & Ch2 high Pass 50Hz - 300Hz, 500Hz - 3Khz (X10).
- Crossover Band-Pass control. Fully adjustable 12Db Bass equalizer. 2 ohm stable stereo. 4 ohm mono bridgeable. 3 channel mixed-mono capable.
- Full ice-controlled protection circuitry. Mute and delay soft start system. High level input with smart auto turn-on.
- Full ice-controlled protection circuitry. 2 Ch./ 4 Ch. input mode switch. Rica preamp line output. Lena brand audiophile capacitors.
- 8 Volt preamp circuitry. Status mode LED indicator. Minimum THD at rated power: <0.05%. frequency response: 10Hz - 40Khz.
- Sensitivity: 100Db @ 1W/ 1M. Damping factor: > 200 @ 100Hz. Three 20 amp maximum fuses. Dimensions: ( w x H x L ) 8.6" X 2" X 13.7".
Description
The Rxm-f3 has a conformal coating on its PCB (printed circuit board) in this coating protects the amplifier from the elements of the ocean. If water gets sprayed on the amplifier you will not have to worry. The exterior Screws are made of stainless steel to better withstand the elements. This amplifier is Rockville Rxm-f3 1600 Watt peak/800W RMS marine class D mono block amplifier rams power ratings: .....800 Watts (4 x 200 watts RMS) @ 2 ohms .....800 Watts (2 x 400 watts RMS) @ 4 ohm Bridged>.....500 Watts (4 x 125 watts RMS) @ 4 ohms peak power: .....1600 Watts (2 x 800 @ 2 ohms or 1 x 1600 @ 4 ohms) high-speed MOSFET power supply studio-grade bipolar output stage transistors fully adjustable 12Db/ Octave Crossover with differential circuitry ch3 & CH4 low pass 50Hz - 3khz ch3 & CH4 high pass 15Hz - 1khz ch1 & CH2 high pass 50Hz - 300Hz, 500Hz - 3Khz (x10) crossover band-pass control 4 ohm mono bridgeable Channel mixed-mono capable full ice-controlled protection circuitry mute and delay soft start system high level input with smart auto turn-on full ice-controlled protection circuitry CH/ 4 CH Input mode switch race preamp line output ulna Brand audiophile capacitors Volt preamp circuitry status mode LED indicator damping factor: > 200 @ 100hz three 20 amp maximum fuses dimensions: ( w x H x L ) 8.6˝ x 2˝ x 13.7˝
I didnt really know what to expect buying a low priced 1200w amp. I was pleasantly surprised. I am running a Fusion RA-70 head unit and driving 4 Wet Sounds 808 speakers. My old amp was pushing 35w RMS per channel. I figure I am getting a clean 100w RMS per channel of clean power out of this amp. I am not a thumper. Classic rock mostly. I have not yet run this amp for prolonged periods at high volume. I have rune the amp for 12 hrs at medium volume with no problems.
I think this amp works great for the money. I paired it with a 10" alpine marine sub. Extremely happy with how it sounds. Just mounted sub under a seat on the boat and sounds great now. Now I've heard better. It doesn't have that really tight bass but works for my application.
GREAT AMP. IM RUNNNG 4 COMPONENTS ..THE RE AUDIO XXX IN MY GIRLS 2010 HIGHLANDER... AMAZING. CAN POWER THEM PERFECTLY
Over all very happy. Used in a side by side, so not looking for real high fidelity. Shipping was quick, install was easy.
Only negative is the mic/ loud speaker didn't work. No, biggie, probably wouldn't use it anyway.
These are not cheap junk amps. Replaced my rxm4 with this in order to add a sub to my existing 4 speaker system. Now it runs 4 fusion 7.7" signature series and 1 fusion 10" signature sub. Sounds awesome. Well worth it.
0 comments:
Post a Comment